CategoriesArticles News Press Release Racing

Race Report: 2016 SCCA Majors Tour Final Round

The 2016 SCCA Majors Final Round at Portland International Raceway

Chino, California (July 05, 2016) – Jackson Racing heads to the Final Round of the Majors Tour.

The Jackson Racing team headed up to the Pacific Northwest again for the last stop of the SCCA Majors Tour held at Portland International Raceway. Held over the 4th of July weekend, it always makes for a fun trip filled with friends, laughs, and racing.

Friday qualifying came and the weather was perfect! Oscar Jackson Jr. set out on the track and threw down a smoking lap time that landed the FR-S on pole by several seconds. The Jackson Racing Supercharger continues to work perfectly in all the different track conditions.

Saturday’s weather was just as nice, and would make for a great race. The green flag dropped and the cars were off! There was a multi car collision in turn 1, which resulted in one of the cars oiling down the track. The race was stopped for cleanup and rescheduled for Sunday morning.

Sunday was set to be a busy day, since there would be 2 STU races nearly back to back. Oscar Jackson Jr. set out from pole in Race 1 and quickly put some distance between the other competitors and drove to the win! The Jackson Racing FR-S came back to the pits for fuel and fresh BFGoodrich tires and went out to the grid for Race 2. Another start from pole and again Oscar Jr. was out in front. After a few laps there was a full course caution. This time the track was cleared quickly and the race commenced. Oscar Jr. and the Jackson Racing FR-S kept the push after the restart and pulled off another flag to flag win, the 11th win on the season.

Besides winning the races, Oscar Jr. was presented with his Championship trophies for both the Super Touring Light and Super Touring Under classes. It was a great season for Jackson Racing in the SCCA Majors Tour. Now the team prepares for the the SCCA National Championship Runoffs at Mid Ohio in September, with the hopes of bringing the National Championship home!

CategoriesNews Press Release

17inch 949Racing 6UL Wheels Now Available

Chino, California (January 18, 2015) – 17in 949Racing 6UL Wheels now shipping from Jackson Racing

The 6UL is one of the most trusted track wheels in the Miata and Honda community, and now it is available for your FR-S/BRZ, S2000, WRX, NC & ND MX-5 and 2006+ Civic. Offsets for each application were specifically chosen to improve fitment and performance.

The latest generation 949 Racing 6UL wheel features the same great style of all previous 6UL’s and features a flow formed outer rim barrel for a better strength to weight ratio and lower rotational movement. The entire wheel was redesigned from ground up to further enhance controlled dissipation of loads and increase fatigue life.

Tungsten 5

Silver 5

Charcoal 5

Bronze 5

• 17×8 +40 Offset 16.1lbs
• 17×9 +40 Offset 17.4lbs
• 5×100

• 17×9 +48 Offset 17.4lbs
• 5×100

• 17×9 +55 Offset 17.4lbs
• 17×10 +52 Offset 18lbs
• 5×114.3

NC MX-5/Civic
• 17×8 +48 Offset 16.1lbs
• 17×9 +48 Offset 17.4lbs
• 5×114.3

• 17×8 +45 Offset 14.8lbs
• 17×9 +45 Offset 15.5lbs
• 4×100

Available Finish: Bronze, Charcoal, Silver, Tungsten

Starting at $219.00

• Low Pressure Cast – Flow Formed – Monoblock Construction
• T6 Heat Treated
• VIA Certified
• JWL Approved
• Double Valve Design
• Painted, Clear Coated Finish
• Center Cap Included
• Valves NOT Included







CategoriesNews Press Release

In Development: 17″ 949Racing 6UL Wheels


We are happy to announce we will now be carrying 949Racing 6UL wheels, starting with the release of the new 17″ 6UL!

Also, we have been working closely with 949Racing on the new 17″ FR-S/BRZ fitment to ensure compatibility.

The 17″ 6UL is low pressure cast and features a flow formed outer rim for a better strength to weight ratio. A lot of the same great design and style of the extremely popular 15” 6UL was brought over to this all new wheel.

17″ Sizes:
17×9 – 5×100
17×9 – 5×114.3
17×10 – 5×100
17×10 – 5×114.3

17″ 6UL Features:
• 17×9: ~17.4 lbs
• Low Pressure Cast – Flow Formed – Monoblock Construction
• T6 Heat Treated
• JWL Approved
• VIA Certified 620kg
• 73.1mm Center Bore
• Double Valve Design
• Painted, Clear Coated Finish
• Center Cap Included


We are expecting the 17″ 6UL to go into production early summer, with wheels arriving in Q3 2015.
We will publish offsets as soon as they are available and begin taking pre-orders.

*These images are CAD renderings, not actual wheel photos. We will publish pictures of the wheel samples as soon as they arrive.